Liftmaster Compatible Garage Door Opener Parts

41A4373A Discontinued USE 41A4373A/41A5034

$54.95

Safety Sensor Kit

41A5034

$32.95

Garage Door Opener Safety Sensors

41A6569

$24.00

Sensor Brackets

• This applies to 41A4373A/41A5034 above:
• Compatible with LiftMaster and Chamberlain Brand garage door openers 1993 thru 1997
• One green light one yellow light.
• Each sensor shown includes approximately 18" of wire attached. Designed to splice into your existing wires. Wire connectors, 41A5266-1 brackets and installation instructions.
• Extension brackets are part number 41A5281 sold separately.

• This applies to 41A5034 above:
• Compatible with LiftMaster and Chamberlain Brand garage door openers 1997 thru current
• NO brackets (only sensors); use 41A5266-1 below
• One green light and one yellow light
• Each sensor shown has approximately 18" of wire attached. Designed to splice into your existing wires. Wire connectors included
• Fits 41A5266-1 brackets pictured below
• Will NOT fit brackets that the 41A4373A Sensors use
• "Recommended Surge Protection when replacing safety sensors or circuit boards"

• This applies to 41A6569 above:
• For 41A4373A safety sensors - shown on the left
• Includes 1 pair of brackets and fasteners

41A5266-1

$18.00

Garage Door Opener Safety Sensor Brackets for 41A5034 Sensors

41B873

$12.00

Garage Door Opener Safety Sensor Sun Shields

41A5281

$11.00

Garage Door Opener Extension Brackets for 41A5266-1 Brackets

• This applies to 41A5266-1 above:
• Compatible with LiftMaster and Chamberlain Brand garage door openers 1997 thru current
• FOR use with 41A5034 style sensors ONLY

• This applies to 41B873 above:
• LiftMaster, Chamberlain, Sears Craftsman, and Chamberlain Brand garage door opener safety sensor sun shields
• These safety sensor sun shields are used to prevent sunlight from shining into sensor causing accidental reversal of garage door
• ONLY compatible with 41A5266-1 safety sensor brackets pictured above
• Includes one pair

• This applies to 41A5281 above:
• Allows for flexibility in installation of 41A5266-1 brackets above

CPS-U

$100.99

Commercial Door Operator Protector System

41K4629

$54.75

Protector System Interface Box

CPS-UN4

$186.99

Commercial Door Operator Protector System

• This applies to CPS-U above:
• For use with models CPS, CPSll, CPS-L and CPS-U
• Direct connect commercial protector system for Logic Control
• Provides protection for doors up to 30ft wide
• For use with the Logic Control Board Version 2 only
• If using multiple sets of photo eyes on one Logic operator, use CPS-U for lowest position and CPS for every other position
• ONLY use with LiftMaster commercial door operators
• Includes emitter, receiver, mounting brackets, "C" wrap, wire, necessary hardware, installation manual

• This applies to 41K4629 above:
• Replacement Interface Box
• Used with CPS Protector Systems
• Included with CPS Protector System - shown above
• For use on LiftMaster and Link commercial door operators only

• This applies to CPS-UN4 above:
• Commercial Protector System provides protection on doors up to 30 feet wide
• For use on LiftMaster commercial door operators only
• Provides protection for doors up to 30ft wide
• Includes emitter, receiver, mounting brackets, "C" wrap, wire, fasteners, and installation instructions

41A6569

$24.00

Chamberlain Sears Craftsman Safety Sensor Brackets
• For CPS and CPS-U sensors - shown above
• Includes 1 pair of brackets and fasteners

34545R

$4.00

Insulated Staples

• 30 insulated staples with 2 screws
• Used for mounting wall button and safety sensors wiring

35265B

$12.95

Wire 2 Conductor

• 90' spool, 2 conductor wire for damaged wire repair
• For use with wall buttons or safety sensors

41B4115

$11.95

NO LONGER AVAILABLE

Chamberlain Sears Craftsman Garage Door Opener Pigtail Connectors

Use replacement sensors 41A4373A shown above to make your repair.